Ford
Roadunner
Locksmith

Disclaimer: This guide is for informational purposes only and attempting DIY repairs can be risky. Consult a qualified locksmith if you’re unsure about any steps. 

Step 1: Preparation. The technician will gather the necessary tools, including a picking kit, a re-keying kit with new pins and springs, and potentially a removal tool for the lock cylinders depending on the Ranger’s model year.
Step 2: Lock Cylinder Removal. The technician will remove the lock cylinders from the doors, ignition (if included in the re-keying service), and tailgate (if applicable) using the removal tool or by following disassembly procedures specific to the Ranger’s model year.
Step 3: Disassembly and Pin Replacement. Once removed, the technician will disassemble the lock cylinders. This involves removing the cylinder housing and accessing the tumblers (wafers or pins) that determine which key can turn the lock. Using the re-keying kit, the technician will replace the existing tumblers with a new set that matches a new set of keys provided.
Step 4: Reassembly and Testing. After replacing the tumblers and springs, the technician will reassemble the lock cylinders and test them with the new keys. They will ensure all locks operate smoothly and securely with the new keys.
Step 5: Reinstallation. Finally, the technician will reinstall the re-keyed lock cylinders back into the vehicle’s doors, ignition, and tailgate (if applicable).

Disclaimer: This guide is for informational purposes only and attempting DIY repairs can be risky. Consult a qualified locksmith if you’re unsure about any steps. 

Step 1. Simple Cleaning and Lubrication: If the problem is dirt, debris, or lack of lubrication, clean the lever mechanism and apply a lubricant designed for door lock mechanisms to ensure smooth operation.
Step 2. Tightening or Adjusting: Over time, the screws or connections within the door handle assembly might loosen, causing the lever to feel wobbly. Tighten the screws or adjust the linkage between the lever and the cable to restore proper operation.
Step 3. Replacing Worn Parts: If components like bushings, springs, or clips within the lever mechanism are worn out or broken, replace them individually to restore functionality.
Step 4. Replacing the Entire Door Handle Assembly: In some cases, extensive damage to the lever or other components within the door handle assembly might necessitate replacing the entire assembly.

Disclaimer: This guide is for informational purposes only and attempting DIY repairs can be risky. Consult a qualified locksmith if you’re unsure about any steps. 

Step 1: Check the Key for Wear or Damage. Inspect the key for signs of wear, bending, or cracks.
Step 2: Ensure the Steering Wheel Isn’t Locked. If the key won’t turn, the steering lock may be engaged.
Step 3: Clean and Lubricate the Ignition Barrel. Use a graphite-based lubricant or WD-40 specialist dry lubricant to loosen any internal components.
Step 4: Check the Gear Shift Position (Automatic Models Only). Ensure the car is in Park (P) before attempting to turn the key.
Step 5: Remove Any Debris or Foreign Objects. Use compressed air to clean out the keyhole in case dirt or small debris is causing obstruction.
Step 6: Check the Battery Condition. A weak or dead battery can cause ignition switch issues, especially in models with electronic ignition components.
Step 7: Test the Ignition Switch Wiring (Advanced Step). If the key turns but the dashboard lights don’t come on, the issue may be with wiring behind the ignition barrel.
Step 8: Tap the Key Gently with a Rubber Mallet. Lightly tapping the key while turning can sometimes realign internal ignition tumblers if they are sticking.

Ford drivers in Camps Bay trust Roadrunner Locksmith for swift, expert solutions to their vehicle lock and key issues. Whether you’re enjoying the scenic views along Victoria Road or parked near the beach, our mobile units are equipped to assist you on-site. We specialize in addressing common Ford problems, such as ignition barrel failures in models like the Fiesta and Focus, and transponder key malfunctions in the Ranger and EcoSport. Our services include precise key cutting, duplication, and programming, as well as smart key services and keyless ignition system repairs. In the event of a lockout or broken key, our technicians provide prompt assistance to get you back on the road. Serving Camps Bay and the greater Cape Town area, Roadrunner Locksmith delivers dealership-quality service without the associated costs or delays.